Call Us: +1.805.987.7755
Follow Us:

Large Tank/Turntable Systems

SDI-5350 Automated Ultrasonic Precision Immersion Inspection System


SDI-5350 System Overview

The SDI-5350 advanced immersion system is for the inspection of airframe and aero engine components. The equipment components include a heavy duty precision bridge mounted on a gantry positioned over a stainless steel immersion tank.

A range of turntable/lift platform combinations is available for loads up to 7000# in the standard systems. The system can be equipped with single or dual search tubes each configured to accept a range of gimbal options.

The equipment will operate with any system level ultrasonic instrumentation. It is designed to achieve the accuracy and resolution required at high throughput speeds in a harsh operating environment. SDI have supplied systems of this type for testing product from all major aero engine and rocket motor producers.


SDI have supplied systems of this type for testing product from all major aero engine and rocket motor producers.

In addition to being approved by all major aero-engine manufacturers, the following advanced features of SDI systems give major advantage over competitor's equipment in terms of ease of use and inspection set-up and test time;

The service, maintenance and technical support facilities offered by SDI can be tailored to meet a wide range of customer requirements. Customers who purchase our equipment receive the complete range of services free of charge for the first year following equipment installation.


  • Automatic multi-transducer inspection with different transducers on dual search tubes performing simultaneous or sequential independent scans on the same part.
  • Multiple scan inspection with a series of scans being performed without operator intervention. Each scan can have a different instrument setting and produces a different data file. The scan sequence, or script, can include automatic DAC set-up, and transducer characterization. If SDI instruments are used the instrument parameters, such as gate position and gain, can be changed during the scan at rep rate speeds and coordinated with the motion.
  • System functional axes where the operator is able to move the transducer along its axis, or change the angle of incidence without moving the sound entry point, with a single control.
  • Automatic identification of defects with the cluster analysis feature.
  • Import/Export of scan plans to CAD.
  • Automatic normalization and water path adjustment.
  • Advanced complex contour following capabilities.
  • Automatic teaching of component scan plans.
  • Nested scan plans where multiple parts in different locations can be tested in the same sequence.

Although the SDI 5230 will operate with most system flaw detectors, incorporating one of the SDI USPC-7100 high performance systems instruments gives the following additional benefits.

  • Nested scan plans where multiple parts in different locations can be tested in the same sequence.
  • Change instrument parameters at rep rate speeds.
  • Back wall following gates.
  • Coordination of instrument parameters with complex scan plan i.e. integrate variable gain with on-the-fly scanning of complex shapes.

SDI-5350 Automated Ultrasonic Precision Immersion Inspection System Media


Mechanical Configuration

The system consists of floor mounted heavy gauge gantry which spans the stainless steel immersion tank. The precision bridge, search tube and gimbal assembly are mounted on the gantry, isolating them from the tank structure.

The stainless steel tank is provided with polycarbonate windows to meet the customer's requirements. The base of the tank is reinforced to support turntables, rotators and lift platforms.

The turntables have interchangeable drives making it possible to employ an auxiliary small high speed turntable in a system fitted with a large heavy duty unit for normal operation. All SDI turntables and rotators are removable and interchangeable.

The heavy duty 1324 and 1325 turntables have brushless 3 phase drives installed in oil filled underwater housings. The 1325 is the heavy duty unit for parts weighing up to 5000#. The 1324 is for parts up to 2000# they are fitted with three jaw self centering chucks which can be fitted with an option motorized drive.

For larger parts, the SDI-5410 immersion systems are supplied with lift platforms and turntables with capacities up to 7000#.

A number of lift platform options are available. For lower cost systems the 1645 series turntables provide an upper loading position and a lower test position on fixed locator stops. The drive is independent of the system controller and is positioned by limit switches.

For precision elevation the 1640 series lift platforms are available. These are lead screw driven with closed loop servo control and can be positioned accurately at any height for component testing. Their motion is fully integrated with the system control and the position can be stored as part of a scan plan.


Gantry-X Axis

The gantry is fabricated from heavy steel box section with a high redundancy outrigger design calculated to provide the required rigidity and stability for the large accelerating mass of the bridge and search tubes. The gantry is fitted with ground tracks with leveling jack screws and guide bars.

Mounted to the tracks are the linear ways and heavy duty rack and pinion drive components to provide precise positioning and encoder feedback. The gantry also carries the cable distribution components. All drives are closed loop d.c. servos with encoders/resolvers.


Bridge Y Axis

The bridge is fabricated from heavy aluminum box section with a rigid box girder construction. Mounted to it are the precision V ways for the Y-axis carriages which support the Z-axis vertical drive housings. The design incorporates methods of adjusting the orthogonality and alignment of the X, Y and Z axes.


Search Tubes Z-Axis

The search tubes incorporate several novel design features to provide the required adjustments and accuracy to maintain the alignment of two independent search tubes during high speed 3D contour following. The stainless steel cruciform construction, precision rack and pinion drive and V ways provide single search tube systems with these benefits even though the alignment requirement does not exist.


Gimbals

The gimbals are closed loop servos with integral high precision resolvers. The units are housed in oil filled stainless steel enclosures. The transducer is attached to the gimbals by a UHF mount.


Electrical Configuration

The electrical configuration describes the components and interconnections for the motion control, drive, instrumentation and data acquisition sub systems. The majority of the components are housed in the system console. All system components meet applicable US and International safety codes. Apart from the very low current ultrasonic signals, no voltages greater than 70 volts are present anywhere on the system outside the control console.


Control Console

The mobile control console can be positioned anywhere within reasonable distance from the system. Current SDI systems have similar remote consoles up to 80 ft. from the scanner.

The system can be configured with two 19 inch LCD monitors linked in the Windows operating environment to allow windows to be dragged from one screen to the next, or expanded over two screens. The console requires a single 110V 60 Amp single phase supply.

SDI will install the necessary transformers to achieve this from the customer's supply. The console houses all the computing, drive and instrumentation components required to operate the system.

The enclosure includes a filtration and refrigeration unit where required. The electrical layout is shown below:



Instrumentation

All SDI systems are able to operate with a variety of flaw detectors. Systems have been installed using instruments supplied by all major instrument manufacturers. In addition, SDI manufactures their own range of high performance flaw detectors designed specifically for systems applications. The following third party flaw detectors have been supplied fully integrated with the SDI software. USD 15, USD 30, USIP 20, USPC2100, Stavely 138, Panametrics 9000. Other programmable flaw detectors can be used as required.


Motion Control

The motion control is provided by the SDI-1830 MasterScan advanced controller. Designed specifically for ultrasonic applications, it features ultrasonic functional axes and scripted scan plans. This means that complex motion control and acquisition activities unique to ultrasonic inspection techniques are available to the operator through simple commands using ultrasonic terminology. The operator can construct complex scans by chaining together individual motion commands, scan plans and instrument set-ups. Full details of MasterScan are given in the data sheet. Some of the key features are:

  • Functional axes using standard UT terminology
  • Import/Export of scan plans to CAD programs
  • Automated normalization
  • Auto teach of scan plans
  • Integrated instrument control coordinated with the motion along a scan trajectory
  • Scripted scan plans
  • Chained scans
  • Dual independent search tubes performing different scans simultaneously
  • Stop on defect
  • Return to defect
  • Display of scan progress and time to finish


Acquisition / Analysis

The system is supplied with the latest SDI-WinScan multi-tasking acquisition and analysis package designed for high throughput production applications. A technical description of the features and benefits of this high performance industrial package is attached. Some of the key features are:

  • High-speed pan and zoom through entire data file.
  • High speed, high quality 1:1 plotting of all or selected areas of the data file.
  • Scan comments stored with the data file
  • Multi-channel operation
  • True multi-tasking to allow scanning, plotting and viewing of stored files to be performed simultaneously without a reduction in speed
  • Numerous analysis features such as histograms, in dB and linear scales, cluster analysis providing automatic defect identification, image smoothing and filtering with operator defined kernels
  • Full Waveform Capture with B-Scan

Another time saving feature of the fully integrated motion control and data acquisition package is the ability to perform mini-scans. Areas of interest can be tagged on the data file and the system will automatically drive back to them and re-scan the area using selected defect evaluation scan parameters such as full waveform capture.



Installation

The system will be fully assembled and made operational at the SDI facility in Camarillo for customer buy off. The Acceptance Test Procedure (ATP) will be carried out using the test samples supplied by the customer. SDI will address any items requiring rectification prior to authorization for shipment by the customer representative. Upon receiving approval, SDI will dismantle, crate and ship the system. SDI will carry out site preparation prior to the arrival of the system. The system will then be assembled and made operational on site. The ATP will then be repeated. The system timeline is attached.


Training

SDI provide a comprehensive training program including 5 days training of personnel in the operation and routine maintenance of this equipment. This training will take place either at the SDI facility or at the customer site after installation.


Have A Project For Us? Get in Touch


Camarillo, CA
  • Address: 650 Via Alondra,
    Camarillo, CA 93012
  • Phone: (805) 987-7755
  • Fax: (805) 987-6010

Chandler, AZ
  • Address: 6145 W. Detroit Street,
    Chandler, AZ 85226
  • Phone: (602) 454-2500
  • Fax: (602) 454-2515

Indianapolis, IN
  • Address: 915 Western Drive,
    Indianapolis, IN 46241
  • Phone: (317) 273-0633
  • Fax: (317) 672-3781
© 2015. « Structural Diagnostics Inc. ». All right reserved.