Equipment In Inventory
Equipment In Inventory
The following equipment is either fully completed or partially completed. Minor modifications can still be made to customize the equipment to meet your needs. If you are looking for a quick solution to your UT equipment needs, start here! All equipment, new or refurbished, will come with a complete 1 year warranty. Please call or fill out contact form at the bottom for more specific info and pricing.
Have Questions About Our Inventory?
SDI-5130 (Refurbished)
This smaller sized refurbished tank is suitable for turbine disk inspection. It comes with a 28″ diameter turntable with a 500 lb. capacity. The system is completed and can ship within 1 week, pending pre-shipment quality checks. Cost-effective solution, with quick delivery and still includes a 1 year warranty. Can be supplied with basic software or new disk inspection software with autocalibration, circumferential shear scans on sloped and curved surfaces, and more. Video to the right shows a 25 MHz inspection to detect micro-cracking in the teeth of transmission gears of land-based power generators. The pink color in the video shows rust inhibitor, used to protect the part.
SDI-5360 11-Axis Gantry with Turntable (new)
This small 11 Axis Gantry with a 30″ diameter turntable is perfect for 3D composite parts, as well as circular parts such as nacelles and cowlings. It can be extended easily in the X direction, if needed. Without modifications, system can be ready to ship within 4 weeks.
SDI-5150 Rebuild
This is a rebuilt utility tank for general lab work. It comes with a 36″ diameter turntable with a 500 lb capacity. This is a low-cost option that can be delivered in approximately 8 weeks.
SOLD!
MARCH 2024
SDI-5620 Horizontal Scanner (New)
This flatbed scanner will scan flat panels up to 6’x14′. It has a stationary bridge and passes the part back and forth, which is the less expensive option than a moving bridge, but it does require more floor space. This scans at 20″/sec, and can be set up as single channel or multi-channel. This is currently scanning parts and can be shipped after successful FAT.
SOLD!
JANUARY 2024
SDI-5130 w/ Heavy Duty Turntable
This immersion tank is equipped with a 36″ turntable that has a 2,000 lb. capacity. Can be supplied with basic software or new disk inspection software with autocalibration, circumferential shear scans on sloped and curved surfaces, and more. Please see the drawing below for size details. Can be ready to ship in approximately 2 weeks.
SOLD!
DECEMBER 2020
SDI-5954 In-line Small Diameter Bar and Tube Inspection System (refurbished)
Also known as a “stuffing box system”, as configured, this is set up to take in bars approximately 0.5-2.0″ diameter. Minimum length is approximately 3′, it can take bars up to 30′ (or longer with extensions). With no modifications, this system could be ready to ship in 2-3 weeks.